Annual replacement filter for the Direct Connect Plus water filtration system
This is the replacement filter for the Direct Connect Plus under-cabinet water filtration system. Replace your filter once per year or at 450 gallons, whichever comes first, to maintain peak performance. If PFAS reduction is your primary goal, replace at 225 gallons.
Replacement is quick and simple. Your Direct Connect Plus housing is reusable, so you simply swap the filter cartridge inside. No tools, no plumbing changes, and no need to replace the housing itself. Please refer to the Filter Replacement & Maintenance Manual in the Media & Resource tab for step-by-step instructions.
Carbon block core with cleanable ceramic shell
Each filter is made in the USA from a proprietary matrix of multiple types of activated carbon combined with proprietary Zeolite minerals, structurally bound into a highly porous block filter form. The core filter is then wrapped in a diatomaceous earth ceramic shell, which is designed to remove very fine particles, cysts and sediment down to 0.5 micron absolute.
The ceramic shell is cleanable. If you notice flow slowing before your replacement is due, the outer shell can be cleaned to remove suspended solids and mineral deposits and restore performance, prolonging the life of the filter.
The filter is independently tested to reduce chloramines, chlorine, lead, fluoride, VOCs, heavy metals, pharmaceuticals, PFAS, MTBE, cysts and sediment. See the Specs tab for reduction figures and rated capacities.
The filters also include built-in, controlled delivery, anti-microbial protection through silver, copper, and zinc elements proven in use through the water filtration industry. Antimicrobial technologies make products cleaner and longer lasting with built-in protection working 24/7 to resist the growth of microbes and the development of unpleasant odors.
These filters are made in the USA. The filter cartridge is NSF/ANSI Standard 42 certified as a component.
Key Features
- Fits the Direct Connect Plus under-cabinet water filtration system
- Standard 10" cartridge format
- Replace annually or at 450 gallons
- Cleanable ceramic outer shell prolongs filter life between replacements
- 0.5 micron absolute particle filtration for sediment, cysts and fine particles
- Simple cartridge swap, no tools or plumbing changes required
- Independently tested to reduce chloramine, chlorine, lead, VOCs, heavy metals, pharmaceuticals, PFAS, fluoride and MTBE
- Made in the USA
- Low waste—only the filter cartridge inside is replaced, your housing is reusable
Don't own a Direct Connect Plus system yet?
Learn more about the Direct Connect Plus under-cabinet water filtration system.
We Are Here to Help
Radiant Life has a dedicated technical support team available to answer all your questions regarding filter replacement, cleaning, and maintenance. Our support team is available to answer your questions during the lifetime of the product and advise you on any performance issues and filter replacement.
NOTE: It may take up to 2 business days to process your order.
Place your order online or call Our Water Division at (888) 593-9595 Option # 3 with any questions or to order. NOTE: Typical delivery time is one week.
Frequently Asked Questions
Q. Which system does this replacement filter fit?
A. This filter fits the Direct Connect Plus under-cabinet water filtration system. If you own the standard Direct Connect, please see the Direct Connect replacement filter instead. Both are standard 10" cartridges, so they fit either housing physically, but they are different filters with different performance: this ceramic-shelled filter adds sediment and cyst filtration and is cleanable, while the standard Direct Connect filter has higher rated capacities. Use the filter made for your system.
Q. How often should I replace my filter?
A. Replace the Direct Connect Plus filter annually or at 450 gallons, whichever comes first. If PFAS reduction is your primary goal, replace at 225 gallons.
Q. Can I clean the filter instead of replacing it?
A. The ceramic outer shell can be cleaned to remove suspended solids and mineral deposits, which can restore flow and prolong filter life between replacements. However, cleaning refreshes only the outer shell. The carbon block core inside continues to deplete with use, so the filter should still be replaced on schedule. Refer to the Filter Replacement & Maintenance Manual in the Media & Resource tab for cleaning instructions.
Q. Do I need any tools to replace the filter?
A. No. The Direct Connect Plus housing is reusable and the filter cartridge inside swaps out in minutes with no tools or plumbing changes. Refer to the Filter Replacement & Maintenance Manual in the Media & Resource tab for step-by-step instructions.
Q. What contaminants is this filter designed to reduce?
A. The Direct Connect Plus filter combines a carbon block core with a ceramic shell to provide mechanical filtration and physical adsorption. It is independently tested to reduce chloramine, chlorine, lead, fluoride, VOCs, heavy metals, pharmaceuticals, PFAS, MTBE, cysts and sediment. See the Specs tab for reduction figures and rated capacities for each.
Q. Is this filter NSF certified?
A. The filter cartridge is NSF/ANSI Standard 42 certified as a component, which covers the materials in contact with your water. The reduction figures we publish come from independent third-party testing run to NSF/ANSI test protocols.
Q. How do I know when it's time to replace my filter?
A. The most reliable approach is to replace the filter on schedule: annually or at 450 gallons. If flow slows before then, try cleaning the ceramic shell first. If flow does not improve after cleaning, or you notice a change in taste or odor, the filter is nearing the end of its service life and should be replaced.
Specification
| Specifications | Direct Connect Plus Replacement Filter |
| Item Number | 107068 |
| Filter Dimensions | 2.65" X 9.75" (standard 10" cartridge) |
| Compatible System | Direct Connect Plus |
| Sediment Filtration | 0.5 Micron absolute |
| Ceramic Shell | Cleanable |
| Maximum Pressure | 85 PSI |
| Maximum Water Temperature | 100°F (cold water only) |
| Recommended Replacement Interval | Annually or 450 gallons (225 gallons for PFAS) |
| Certification | NSF/ANSI Standard 42, component |
| Reduction Claims | Reduction | Rated Capacity |
| Sediment | 0.5 Micron absolute | |
| Giardia and Cryptosporidium Cysts | 100% | |
| Chloramine Reduction | >99% | 1,400 gallons |
| Chlorine Reduction | >99% | 1,400 gallons |
| Lead Reduction | >99% | 1,400 gallons |
| Heavy Metal Reduction | >98% | 1,600 gallons |
| Pharmaceutical Reduction | >96% | 600 gallons |
| PFAS Reduction (PFOA, PFOS and five additional compounds) | >95% | 225 gallons |
| VOC Reduction | >94% | 450 gallons |
| Fluoride Reduction | >93% | 450 gallons |
| MTBE Reduction | >92% | 360 gallons |
| Microplastics | >97% (manufacturer rating based on 0.5 micron absolute shell) |
Reduction figures are from independent third-party testing of the Direct Connect Plus filter cartridge, each contaminant tested separately to the applicable NSF/ANSI protocol. Performance may vary with source water conditions.
Radiant Life Direct Connect Plus Water System Manuals
Direct Connect Plus Water System Filter Replacement & Maintenance Manual
Direct Connect Plus Water System Installation & Maintenance Manual

